Management | Favorite |Homepage | 中文版 |         
 
· Spiral plate heat exchanger
· Condenser tube
· Plate heat exchanger
· Radiator
· Electric heating, steam heating stainless steel Fan Yingguo
· Outer coil Fan Yingguo
· Rolling sheet machine cutting scraper
· Junction piece machine dryer
· Vacuum rake dryer
· Alcohol recovery tower
· New, highly efficient stainless steel structured packing
· New Efficient random packing pall ring
· Unsaturated polyester resin equipment
· High-performance thin-film evaporator
· Fermenter
· Seed jar
· Stainless Steel Aluminum Tank Car
· Stainless Steel Tank
· LG Series Centrifugal scraper film evaporator
Contact:Junfeng Hang
Mobile:13951568831
Tel:0510-85180737
Fax:0510-85181788
Zip:214161
Add:10# Road qiao Fulai Park Hudai Binhu District, Wuxi City, Jiangsu
Website:https://www.hakratury.com
E-mail:[email protected]
 
 
Plate heat exchanger
  This equipment is a highly efficient heat transfer equipment for gas - gas, liquid - liquid, gas - liquid convection heat transfer, as well as for steam condensation and liquid evaporation. The product has a high heat transfer efficiency, self-cleaning ability dirt, energy saving, small and inexpensive to use and reliable. Is widely used in pharmaceuticals, solvents, chemicals, rosin, dyes, food industry, heat exchange, waste heat recovery.
Plate heat exchanger design features:
一、High efficiency heat exchanger
   Heat transfer coefficient usually ranging from2000—5000kcal/m2hr℃ ,Shell and tube heat exchanger than the 3-5 times higher。
二、Compact
   Film due to heat transfer in close order, and other forms of heat exchanger compared to a smaller area or space,。
三、Easy maintenance
   Plate tightly assembled together, ready to open the maintenance and cleaning。
四、Life long
   Plate can be used 0.6-1.0 mm 304.316.316L stainless steel or titanium alloy sheet made repression can be a variety of corrosion-resistant media.
5, assembly and flexible solution without strings
heat transfer area may be different according to the user requirements of assembled machine, such as the initial power to change through changes in the plate can be. In addition, because access is a two-plate sealed, grain vent steam flow Daoxing into what may be the security zone, thus avoiding the possibility of two kinds of media collusion. "
Plate Heat Exchanger Technical
Type BR08 BR15 BR20 BR25 BR30 BR40 BR55
Monolithic heat transfer area 0.08M2 0.15M2 0.20M2 0.25M2 0.30M2 0.41M2 0.55M2
Dimensions 200×600 785×275 955×325 955×325 990×390 1210×400 1400×490
Plate spacing mm 2.6 2.6 5.0 3.5 5.0 3.6 3.8
Hole diameter mm 40 50 65 65 80\100 100 125
Design pressure 1.2Mpa 1.2Mpa 1.0Mpa 1.2Mpa 0.8Mpa 1.2Mpa 1.0Mpa
Design temperature( ℃ ) 150 150 150 150 150 150 150
Maximum flow 20t/h 30t/h 60t/h 60t/h 100t/h 100t/h 200t/h


Caution:
one, first check the pre-boot the entire pipe connection system as well as the fluid required by the form of import and export links, open the boot due to the first low-temperature low-pressure valve , and then open the high-temperature high-pressure fluid valves. Shutdown to close the high-temperature high-pressure fluid valves, and then close the low-temperature low-pressure fluid valves.
2, plate heat exchangers used in liquid - liquid exchange, do not need to set up exhaust devices, steam - gas exchange and low-velocity high-viscosity fluids should be set up in the piping system exhaust valves, lose steam trap improve the efficiency of heat transfer units.
3, plate heat exchangers over a long period of continuous operation, due to fluid accumulation in the sediment sets the surface of the plate, increasing the thermal resistance, so that reduces heat transfer efficiency, maintenance staff carry out regular cleaning and maintenance.
4, maintenance time, such as the need to replace gaskets, first plate with acetone or ethyl acetate cleaned, and then each slot in the plate and sealing mat coated with adhesives, which will be a little dry gasket embedded, such as tank, surrounded by uniform pressure level, a few hours can be assembled.

Gasket Material:
Applicable to medium and temperature
NBR: Non-polar oils, mineral oils, lubricants, silicone oil and so on. -30 +130 ℃ EPDM rubber: water vapor, large steam, ozone, ketones, alcohols, acids, alkalis, non-petroleum-based lubricants. -30 +150 ℃ Food Rubber: Food, beverages, milk, animal and vegetable oils, the pharmaceutical industry.
-40 +130 ℃
Buddha rubber: inorganic acids, alkalis, aromatic fuel oil, halogenated hydrocarbons, etc..
-20 +200 ℃

Fluid in the flow path within the mobility patterns of the map Machine main technical parameters
型号\项目
BR08
BR15
BR20
BR25
BR30
BR40
BR55
A
280
360
425
425
500
510
650
B
110
165
200
200
252
230
290
C
215
295
345
345
420
420
550
D
119
155
280
272
317
263
330
E
215
685
850
856
785
1044
1200
F
700
1000
1250
1250
1250
1450
1720
G
800
800
1300
1030
1300
1230
1550
H
85
780
1350
1020
1380
1200
1600
Over size
Dg40
Dg50
Dg65
Dg65
Dg80/100
Dg100
Dg125
 
[Back] [Print]
 
WEBSITE WUXI SHUANGSHENG PETROCHEMICAL EQUIPMENT CO.,LTD. WXSSSH.COM Add:10# Road qiao Fulai Park Hudai Binhu District, Wuxi City, Jiangsu  Contact:Junfeng Hang Mobile:13951568831 Tel:0510-85180737
Fax:0510-85181788  Website:https://www.hakratury.com  E-mail:[email protected]  webdesign by Juntong.net
 
      ICP09066647